Removal Of The Light Source Cover - Barco DP2K SLP Series User And Installation Manual

15. Removal and installation of the projector covers

15.1 Removal of the Light Source cover

W
ARNING
cedure.
Necessary tools
Flat screwdriver 7 mm
How to remove the Lamp House cover?
1. Loosen the four captive screws (reference 1 image 15-1) of the Lamp House cover using a 7 mm flat screwdriver.
2. Remove the Lamp House cover from the projector.
Image 15-1
132
:
Switch off the projector prior to start with this procedure, unless otherwise specified in the pro-
1
R5906847 DP2K SLP SERIES 02/06/2017