15. Removal and installation of the projector covers
15.6 Removal of the side cover plate of the Light Processor compartment
To access the side cover plate of the Light Processor compartment, the projector left side cover has to be
removed first. This procedure assumes that the projector left side cover is already removed.
C
AUTION
result in a tamper event. An authorization to clear the security warning on the projector, after closing off the
Light Processor compartment, will be needed!
Necessary tools
3mm Allen wrench.
How to remove the side cover plate from the Light Processor compartment?
1. Remove the screw at the top of the cover plate (reference 1 image 15-8) and the two screws at the bottom of the cover plate
(reference 2 image 15-8). Use a 3mm Allen wrench.
2. Remove the side cover plate left (A) then up (B) then away (C).
Image 15-8
138
:
Opening the Light Processor compartment by removing the top cover plate or side cover plate will
A
A
1
B
B
C
2
R5906847 DP2K SLP SERIES 02/06/2017