Setup And Use; Determine Set-Up Location; To Set-Up On Table-Top - Lightspeed Redcat Access User Manual

SECTION 2:
SET-UP & USE

1. DETERMINE SET-UP LOCATION

The Redcat Access is shipped with a table stand connected and ready for use.
Alternatively, the table stand can be used as the wall mount bracket.
Advantages of either include:
Tabletop (recommended):
• Virtually no setup time
• Greater flexibility to move to
different locations
1A. TO SET-UP ON TABLE-TOP
First, consider that the Redcat Access
should be placed within 7 feet of
an electrical outlet and on a surface
about 3-6 feet off the ground.
Next, find a location as far away as
possible from the teacher who will
be using the mic. The best place is
against the wall opposite where the
Wall-mount:
• More permanent setup
• Greater security
teacher will be speaking. If this is not
possible, other good locations are
along either wall next to the teacher
or in a corner. Avoid placing the RCA
next to where the teacher instructs.
Putting the Redcat Access in close
proximity to the teacher's mic can
result in feedback.
Good placement
Avoid!
Best placement