Taylor-Dunn R0-380-36 Service And Replacement Parts Manual page 26

Lubrication
LUBRICATION AND FLUIDS CHART
Assembly Component
Front Axle:
2: King Pin
3: Ball Joint
5: Wheel Bearing
Brake Fluid:
Master Cylinder
Rear Transaxle:
7: Transmission
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or fluids that may be classified as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that
asbestos brake linings were installed as replacement parts, brake linings should be handled as hazardous
waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding
the proper disposal of hazardous waste products.
Page 26
# Capacity Lubricant
2 - NLGI Grade 2 lithium multi-purpose grease
4 - NLGI Grade 2 lithium multi-purpose grease
2 - NLGI Grade 2 lithium high temp Bearing Grease
1 DOT 3, Meets or exceeds SAE J1703
1 11 oz. SAE 30 wt motor oil
R-380 DC System
MR-380-03