Table of Contents
Advertisement
Make sure the floor is dry before returning the bicycle to its original position.
4
Quarterly Maintenance
Remove the covers.
1
2
Thoroughly clean inside the bicycle. Use a vacuum cleaner and damp rag to remove all the dust
particles, etc.
Check the belt tension per procedure,
3
On-Site Preventive
Maintenance (Service
Technician)
When you are called to service a bicycle perform these preventive maintenance activities:
♦ Perform the software diagnostics. Check LED and keypad functions. Record the odometer reading.
For more information, consult the console service manual equipped with your equipment.
♦ Visually inspect the drive belts for cracks, fraying or excessive wear.
♦ Visually examine all wires and check connectors and wire connections. Secure connections and
replace wiring as necessary.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Primary Belt Tension Adjustment
(on page 9).
Page 7
Advertisement
Table of Contents
