Precor UBK13 Service Manual page 29

Figure 14: Crankarm & Crankarm Removal Tool
Installing a Crankarm
1 Place the crankarm onto the crankarm axle; ensure the crankarm is positioned 180° opposite the
other crankarm.
Figure 15: Crankarm Position
Thread the crankarm mounting bolt into the crankarm axle and fully tighten.
2
3 Install the pedal to the crankarm.
4 Pedal the bike for one minute and then re-tighten the crankarm mounting bolt.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 27