Replacing The Lower Pca - Precor UBK13 Service Manual

8 Secure the battery bracket to the frame with the two screws and fully tighten.
9 Connect the cable connector with the fuse holder to the positive (White Wire) terminal of the
battery, the positive terminal of the battery will be marked with a red square.
10 Connect the remaining cable connector (Black Wire) to the negative terminal on the battery.
11 Replace the covers as per procedure,
Covers - UBK13

Replacing the lower PCA

1 Remove the covers as per procedure,
Covers - UBK13
Removing the Lower PCA
2 Disconnect all of the wires from the lower PCA.
Figure 38: Lower PCA Cables
3 Remove the two screws that secure the lower PCA mounting bracket to the frame.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Replacing the Covers - RBK13
(on page 16).
Replacing the Covers - RBK13
(on page 16).
Replacing the
(on page 21) or
Replacing the
(on page 21) or
Page 42