Page 1
Operating and Maintaining the P10 Console...
Page 4
Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment.
Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit). It is not packaged for individual sale.
Page 6
Operating and Maintaining the P10 Console Make sure all users see a physician for a complete physical examination before they begin any fitness program, particularly if they have high blood pressure, high cholesterol or heart disease; have a family history of any of the preceding conditions;...
Page 7
Important Safety Instructions Read, understand, and test the emergency stop procedures before use. Keep the power cord or optional power adapter and plug away from heated surfaces. Route power cables so that they are not walked on, pinched, or damaged by items placed upon or against them, including the equipment itself.
Page 8
350 pounds (160 kg). Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) ...
The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
Exercise Equipment The regulatory information in this section applies to the exercise equipment and its control console. Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment: ...
Important Safety Instructions Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
You should have received a power cable that meets your local electrical code requirements along with the equipment. Precor treadmills must be connected to a 20 amp individual branch circuit that can be shared only with one PVS. If you need additional help with the power connections contact your Precor authorized dealer.
Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com.
Page 14
Operating and Maintaining the P10 Console...
Club Parameters .................. 20 Viewing the Informational Displays ..........24 User ID Entry with CSAFE Equipment ........... 28 Introducing Users to the P10 Console ........29 Using the Touch Heart Rate Feature ..........29 Using a Chest Strap Transmitter ............. 31 Using the Treadmill Safety Clip ............
Page 16
Operating and Maintaining the P10 Console...
Chapter Getting Started The P10 console offers administrators the ability to set default values that meet their specific needs. These values include items like language, units of measure, and setting a maximum allowed workout time for each piece of equipment.
Page 18
CAUTION: The internal cable kit must be installed by authorized service personnel. Do not attempt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service. Important: If this equipment includes a P80 console, the optional...
The following figure provides information about the console keys. The number and actions of the console keys may differ slightly depending on the type of equipment. Figure 4: P10 console keys Table 1. Parts of the console Number Name Details...
Page 20
Operating and Maintaining the P10 Console Number Name Details Workouts Examples of workouts: Manual • Heart Rate • Interval • Weight Loss • Variety • Performance • Pause Use to pause or end a workout session. OK and Up/Down Use to navigate options and arrows settings.
Chapter Setting Up the Console Use the System mode to configure settings in ways that benefit your users and your facility. The System menu is visible only to administrators and registered service technicians. Changes made to these settings are saved to the fitness equipment.
Operating and Maintaining the P10 Console To view the Club Settings: At the Welcome banner, press Pause. 2. Press the following number keys in sequence to enter the password: 5 6 5 1 5 6 5 3. Press OK. The Set Club Parameters banner appears.
Page 23
Setting Up the Console Select Language (All Equipment) Value: English, Deutsch, Espanol, Francais, Netherlands, Portugues, Rucckijj, and Italiano (Default: English) Select your preferred language for the console display. Note: Programming prompts are not affected by language selection. The prompts in this section continue to appear in English.
Page 24
Operating and Maintaining the P10 Console Set Cool Down Time (All Equipment) Value Range: 0 to 5 minutes (Default: 5 minutes) Select the maximum amount of time the equipment remains in the cool down mode. The cool down time is the period of time following the completion of a program when the user exercises at a reduced work rate.
Page 25
Setting Up the Console Remote Speed Control (Treadmill only) Value: Enable or Disable (Default: Disable) When this feature is enabled, the CSAFE SetSpeed command and the CSAFE SetGrade command are available if: The treadmill is in the CSAFE "InUse" state. ...
Operating and Maintaining the P10 Console Viewing the Informational Displays Informational Display settings are values that provide you with information about the equipment. Types of information contained in this setting group include, an event log, software and equipment serial numbers, and usage information.
Page 27
Setting Up the Console Product Value Information provided HOUR METER Displays the number of hours that the equipment has been in use. Note: The equipment tracks the elapsed minutes, but the value that appears is truncated to the nearest full hour. UPPER BOOT Upper board application software part SW PART...
Page 28
Operating and Maintaining the P10 Console Event (Error) Log The event log (sometimes referred to as an error log) contains the following information: Event number Odometer value when the event occurred Hour meter value at the time the event occurred ...
Page 29
Setting Up the Console Event Description of Event Number Incorrect Communications event upper board to lower board Communication event upper board to lower board Incorrect communications event lower board to upper board E-STOP error (treadmill only) Lift motion detected Lift position value out of range Zero switch not found Un-commanded lift motion Lift going in the wrong direction...
Operating and Maintaining the P10 Console User ID Entry with CSAFE Equipment This equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAFE master device, the user is prompted to press ENTER and begin an identification process.
The P10 console offers an easy-to-follow display and multiple workouts to help people meet their exercise needs. Important: Please review the following sections in this guide with your users before allowing them to use the fitness equipment: ...
Page 32
If the touch heart rate feature does not work for you, Precor recommends that you use a chest transmitter strap. Figure 5: Heart rate target zones CAUTION: Your heart rate should never exceed 85% of your maximum aerobic heart rate.
Introducing Users to the P10 Console Using a Chest Strap Transmitter WARNING Signals used by the chest strap transmitter (or heart rate strap) may interfere with pacemakers or other implanted devices. Consult your physician and the manufacturers of your chest strap transmitter and implanted device before using a chest strap transmitter.
Operating and Maintaining the P10 Console Using the Treadmill Safety Clip The treadmill is equipped with two different stop functions, which behave as follows: If the user … Then the And the console … treadmill belt … Pulls on the lanyard Slows to a stop.
Page 35
Introducing Users to the P10 Console If the restart switch trips during exercise, perform the following steps: Reattach the safety clip if necessary. 2. Press the restart switch down until it clicks, returning it to its normal position. Note: If the restart switch trips, all information about the current workout is deleted.
Operating and Maintaining the P10 Console Treadmill Auto Stop™ (Automatic Stop) Function Important: The default setting for this feature is ON. An administrator can turn off this feature in the System Settings; however, Precor recommends it remain ON. The Auto Stop™ (Automatic Stop) feature is designed to bring the treadmill to a gradual stop when it is not in use.
Chapter Starting a Workout CAUTION: If you are using a treadmill, be sure to attach the security clip to your clothing before starting your workout. The equipment is in the Welcome state when the words SELECT A WORKOUT OR PRESS QUICKSTART TO BEGIN scroll across the scrolling text display.
Operating and Maintaining the P10 Console Starting a Preset Programmed Workout Preset workouts are a great way to tailor your workouts to your fitness goals, stay challenged, and add variety to your sessions. Most P10 equipment contains multiple preset workouts. These workouts include: Manual ...
Page 39
Starting a Workout Pending Shutdown (Self-Powered Equipment) On self-powered machines, the paused state is equivalent to the pending shutdown state. When you stop working out, the equipment begins a 30 second countdown. The accumulated metrics (e.g., time, strides, distance, calories) hold their current values and do not change. Data entry may not be started.
Operating and Maintaining the P10 Console Ending a Session Cooling down is an important aspect of your workout because it helps reduce muscle stiffness and soreness by transporting excess lactic acid out of the working muscles. In addition, a three to five minute cool down allows your heart rate to return to its normal, resting state.
Simple Green® (for more information, visit www.simplegreen.com). Important: Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and void the Precor Limited Warranty. Never pour water or spray liquids directly on the console or console’s screen.
BELTS CHANGE REQUIRED scrolls continuously on the Welcome screen. The input keys are not functional and the user cannot enter values or begin a workout until the belts are changed. Please contact Precor Customer Support to schedule a belt change.
Page 44
Precor Incorporated P10 OM 302291-101 rev A, en 20031 142nd Avenue NE January 2013 P.O. Box 7202 Woodinville, WA USA 98072-4002...
Page 48
Preva Business Suite, the accompanying printed materials, any copies of such software, and all data collected via the Preva Business Suite, are exclusively owned by Precor or its suppliers, as the case may be. Precor is widely recognized for its innovative, award-winning designs of exercise equipment.
Page 49
Note: This product is intended for commercial use. The display apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exercise equipment (hereinafter referred to as the base unit). It is not packaged for individual sale.
Page 50
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this manual provide more details of safety features.
Page 51
Important Safety Instructions Care should be taken when mounting or dismounting the equipment. For Treadmills: Do not use typing or web surfing features while walking at speeds that exceed a slow and relaxed leisurely pace. Always stabilize yourself by holding a stationary handle bar while using typing or web surfing features.
Page 52
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 SPACING—The below minimum spacing recommendations are based on a combination of the ASTM (U.S.) voluntary standards and EN (European) regulations as of October 1, 2012, for access, passage around, and emergency dismount: Treadmills—a minimum of 0.5 m (19.7 in.) on each ...
Page 53
350 pounds (160 kg). Use the equipment only for its intended purpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. Do not operate the equipment where aerosol (spray) ...
The batteries within self-powered equipment contain materials that are considered hazardous to the environment. Federal law requires proper disposal of these batteries. If you plan to dispose of your equipment, contact Precor Commercial Products Customer Support for information regarding battery removal. Refer to Obtaining Service.
Important Safety Instructions Regulatory Notices for the RFID Module When equipped with a control console as described in this document, this equipment may include a radio-frequency identification (RFID) module. The RFID module has been certified to operate at temperatures between -20°C and 85°C (-4°F and 185°F).
Page 56
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Industry Canada This device complies with RSS-210:2007 of the Spectrum Management & Telecommunications Radio Standards Specification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 57
Important Safety Instructions Safety Approvals for Cardiovascular Equipment Precor equipment has been tested and found to comply with the following applicable safety standards. Cardiovascular Type Equipment: CAN/CSA, IEC, EN 60335-1 (Household and similar electrical appliances - Safety) EN 957 (Stationary training equipment, class S/B...
Page 58
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ATTENTION: Haute Tension Débranchez avant de réparer European Applications CE compliance is claimed to the following directives:...
Page 59
Do not attempt to service the equipment except for maintenance tasks. If any items are missing, contact your dealer. For more information regarding customer support numbers or a list of Precor authorized service centers, visit the Precor web site at http://www.precor.com.
Page 60
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Obtaining Updated Documentation Current Precor product documentation is available at http://www.precor.com/productmanuals. You may want to check in for updated information from time to time.
Page 61
Threading the Cable Assembly (P80) .......... 36 Connecting Cables (P80) ..............38 Completing the Console Installation (P80) ........ 44 Threading the Cable Assembly (P30 and P10) ......44 Connecting Cables (P30 and P10) ..........46 Completing the Console Installation (P30 and P10) ....49 Verifying That the Heart Rate Display Is Operational ....
Page 62
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Self-Powered Features .............. 55 Informational Displays Prior to Shutdown ........56 Symptoms of a Low Battery ............56 Using the Optional Power Adapter ..........57 The Optional Power Adapter Kit .............57 Replacing the Battery ................
Provide ample space around the unit. Assemble the equipment according to the guidelines in this manual to ensure that you do not void the Precor Limited Warranty. Important: Any damage caused during installation is not covered by the Precor Limited Warranty.
The hardware kit shipped with this equipment contains the fasteners and other hardware components shown in the following table. Before you begin assembly, make sure that your hardware kit is complete. If not, please contact Precor Customer Support. Fasteners Quantity Hex head screws (1¹₄-inch)
Page 65
Assembling the EFX Fasteners Quantity Phillips-head cap screws (³₄-inch) Socket head cap screws (⁵₁₆–inch x�1¹₄–inch) Buttonhead screws (⁵₁₆–inch x�1 � –inch) Self-tapping screws (1¹₂-inch) Flat head hex drive screws (¹₄-inch x ⁵₈-inch) Bushings Link arm caps Pivot arm caps...
Assembling the EFX Performing the Assembly DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console is properly installed. As you assemble the EFX, make sure to construct the cable assembly as directed so that the necessary connections are accessible when you add the console.
Page 68
Important: Do not stretch, crimp, or damage the cable. Cables damaged by improper installation will not be covered by the Precor Limited Warranty. Figure 3: Thread cable through upright support 3. Attach the left upright support to the base frame using four buttonhead screws, four split washers, and four ⁵₁₆-inch washers.
Page 69
Assembling the EFX 6. Remove the tape at the top of the left upright support. 7. Feed one of the cables you want to install down through the upright support, then along the inside of the foot support and back through the central frame member. The following illustration shows the general path of the cable.
Page 70
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 11. Attach the cable to the appropriate connector inside the base of the EFX, as shown in the following illustration and table. Important: Install coaxial cable using a torque wrench and torque to not exceed 8 lb-in.
Page 71
Assembling the EFX 13. Replace the central plastic base cover, then attach the four buttonhead screws you removed along with the cover. Tighten the screws completely. 14. Replace the lift cover that was removed in the first step. Figure 7: Lift cover replacement...
Page 72
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 To mount the center column support on the frame: Note: Check that the base fasteners are loose before installing the fasteners for the central column support. Have your assistant support the center column support while you align the inside mounting brackets with the upright supports.
Page 73
Assembling the EFX 3. Check alignments and thread the remaining four center column support screws, four ⁵₁₆-inch washers, and four split washers. Tighten with a ³₁₆-inch hex key so the assemblies come together, but leave room for adjustments. Figure 9: Center column support attachment To tighten the fasteners properly: CAUTION: Upright support fasteners must be properly aligned and wrench-tightened in the order described below.
Page 74
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 2. Fully tighten the fasteners on the back of each upright support. Figure 11: Tighten the back fasteners on the upright supports 3. Fully tighten the fasteners on the lower sides of each upright support.
Page 75
Assembling the EFX To attach the water bottle holder: Position the water bottle holder as shown in the graphic and attach it to the right stationary handlebar. Figure 14: Water bottle attachment 2. Secure the water bottle holder to the handlebar using three Phillips-head screws.
Page 76
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 2. To attach the upper body handlebars, place one split washer and one ⁵₁₆-inch washer on each of six socket-head cap screws, then insert three of the screws through each handlebar bracket.
Page 77
Assembling the EFX 4. Fully tighten the fasteners using a ⁹₁₆-inch box-end wrench. Figure 17: Link arm attachment 5. Align the cut-out inside the link arm cap with the link arm mounting hole. Apply pressure to the cap until it snaps into place.
Page 78
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 5. Slide the covers down and snap them into the base mount. Note: Be sure to align the covers so that the lip of each cover fits inside the edge of the base mount and the hook on the base mount fits into the corresponding slot on the cover.
Assembling the EFX Leveling the EFX Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make sure the adjustable feet are in contact with the floor. To level the unit: Gently rock the unit. If there is any movement, ask your assistant to tip the unit to one side while you locate the adjustable feet.
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Breaking in the Equipment Precor equipment does not require an actual break-in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped.
Chapter Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting hardware and connector locations whenever possible. The installation sequence for any of them is as follows: Threading the cable assembly Connecting cables ...
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Threading the Cable Assembly (P80) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount. As you line up the back plate on the console with the console mount, you must make sure that the cable assembly passes correctly through the openings in both components.
Page 83
Installing the Console 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 23: Console positioning on base unit 4.
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors.
Page 85
Installing the Console Table 1. P80 internal cable connections Cable Connector Type Circuit Connector Location Ethernet (LAN) Eight-contact modular, on round black cable TV in F-type coaxial Power Two-contact plug, polarized and latched Data from base unit Eight-contact modular, on flat gray cable Heart rate sensors Four-contact strip, keyed Safety key (treadmills...
Page 86
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 3. Attach the connector on the cable to the connector on the tuner cable and tighten the two connectors securely using two ⁷₁₆-inch open-end wrenches. Position both connectors above the upper right corner of the back plate. 4.
Page 87
Installing the Console Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise caution when connecting the cables.
Page 88
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Connecting the Heart Rate Sensor Cable The heart rate sensor cable passes through the cutaway opening at the upper left corner of the back plate, then down to the small circuit board at the lower left of the console. The following illustration shows how the cable should look once it is installed.
Page 89
Installing the Console Connecting the Power Cable Route the power cable through the cutaway opening at the upper left corner of the back plate. In the nearby opening within the steel console framework, locate the socket that matches the power cable plug and connect the power cable to it.
6. Press gently on the edges of the back cover to snap it into place. Threading the Cable Assembly (P30 and P10) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out the passthrough opening in the console mount.
Page 91
Installing the Console 3. Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure. Figure 29: Console positioning on base unit 4.
5. Pull all cables upward and forward until you can drape them over the top of the console’s back plate. Figure 30: Cable positioning Connecting Cables (P30 and P10) Important: Pass all cables through the semicircular opening just above the console mount, as shown in the following figure. Do not attempt to route any cables through other openings or through the steel channel above the mount.
Page 93
Refer to the following diagram and table to identify the cables and connectors. Figure 32: Cable connections, P30 and P10 consoles...
Installing the Console Completing the Console Installation (P30 and P10) Before you complete the final installation steps, double-check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly.
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Verifying That the Heart Rate Display Is Operational To verify that the heart rate display is operational: Begin exercising on the equipment. 2. Grasp both touch-sensitive handlebars. Note: The heart rate is read within ten seconds. During that time, the heart on the display flashes.
To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of electrical shock, always...
CAUTION: Read and follow the manufacturer’s instructions, particularly dilution instructions, before using any cleaner on Precor fitness equipment. Do not use concentrated cleaners at full strength, or acidic cleaners of any kind; such cleaners weaken the protective finish on the equipment and void the Precor Limited Warranty.
Maintenance Weekly Maintenance Perform the following maintenance tasks every week: Disconnect the external power supply. 2. Clean the ramps and wheels with water or an approved cleaner. 3. Inspect the power cord to verify that it is not pinched under the equipment or between any two moving parts. 4.
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 5. Check the belt tension of the step-up and drive belts. 6. Clean and lubricate the lift motor screw with an approved grease such as SuperLube® with Teflon® or Mobil 1® synthetic grease (adjustable-ramp models only).
An optional power adapter can be purchased and provides sustained power to the equipment. If you plan to change the club settings on a unit equipped with a P30 or P10 console, the power adapter is highly recommended. To purchase the optional power adapter, check with your dealer.
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the user does not maintain the minimum rate of motion, a 30-second shutdown process begins. In this mode, the console displays a countdown indicator and ignores all keypresses.
CAUTION: The internal cable kit must be installed by authorized service personnel. Do not attempt installation on your own as you could void the Precor Limited Warranty. For more information, refer to Obtaining Service. Important: If this equipment includes a P80 console, the optional...
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 Replacing the Battery The equipment’s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authorized service technician. Refer to Obtaining Service.
CONDITIONS. Limited Warranty. Precor Incorporated warrants all new Precor products to be free from defects in materials and manufacture for the warranty periods set forth below. The warranty periods commence on the invoice date of the original purchase. This warranty applies only against defects discovered within the warranty period and extends only to the original purchaser of the product.
Page 106
Internet connectivity, such as Ethernet cabling, routers, servers and switches. Precor is not responsible for the quality of television, video, audio, or other media supplied to its products. This restriction applies to services, such as those provided by a cable or satellite television provider;...
GIVEN ABOVE FOR THOSE SAME PARTS. PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES THEREAFTER. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR LIABILITIES,...
Page 108
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE AND STRICT LIABILITY), OR...
Need help?
Do you have a question about the P10 and is the answer not in the manual?
Questions and answers