Table of Contents
Advertisement
Figure 55: Seat Carriage Wheel
2
Set the replacement 14mm shoulder bolt and wheel in its mounting position and fasten it with the
hardware just removed.
Removing the Release Handle Assembly
3
Using a 14mm and 13mm open end wrench, remove the seat carriage wheels located next to the
release handle pivot.
4
Remove the 14mm lock nut that secures the spring and the release handle pivot to the carriage,
remove the release handle.
Figure 56: Seat Carriage Release Handle
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 54
Advertisement
Table of Contents
