Primary Belt Tension Adjustment - Precor UBK13 Service Manual

Primary Belt Tension
Adjustment
1 Remove the covers as per Procedure
Covers - RBK13
2 Place the belt tension gauge on the primary drive belt.
Figure 1: Belt Gauge
3 The correct belt tension is 70 ± 5 pounds. If the belt tension is correct replace the covers. If the belt
tension is incorrect, continue to the next step.
Figure 2: Drive Belt Adjustment
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Replacing the Covers - UBK13
(on page 21).
Replacing the
(on page 16) or
Page 9