Table of Contents
Advertisement
Figure 42: Seat Post Pop-pin Retaining Ring
3
Pull up slightly on the seat post to relieve the pressure off the pop-pin. Pull the pop-pin out of the
frame.
4
The seat post is now unsupported, ease the seat post into its lowest position.
Installing the Seat Post Pop-Pin
5
Assemble the seat post as follows: Starting from the threaded side of the pin, slide on the spring
and bushing; on the non-threaded side of the pin, slide on the rubber insert. See Figure Below.
Figure 43: Seat Post Pop-Pin Assemble
6
Pull the seat post up until one of the height level holes is aligned with the pop-pin housing on the
frame.
7
Slide the pop-pin assembly into place so the pin locks the seat post into place.
8
Secure the pop-pin assembly in place with the retaining ring.
9
Replace the pop-pin knob.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 45
Advertisement
Table of Contents
