Daikin AT09HV2S Service Manual page 8

Removal procedure, 2.5/3.5/5.0 kw class, 9000/13000 btu/h class, indoor unit, inverter/non-inverter, wall mounted type, cooling only, heat pump
Table of Contents

Advertisement

Removal of Front Grille
Step
3
Remove the 2 screws.
Unfasten the 3 hooks at
4
the top.
Pull the upper part of
5
the front grille out and
lift the lower part up,
and then remove the
front grille.
6
Procedure
When reassembling the
indoor unit, drive the screws
with the horizontal blades
open or removed.
(R4322)
The convex marks (...) on
Hook
the front panel indicate the
position of the hooks.
(R16030)
When reassembling, make
sure that all the 3 hooks are
fastened as they were.
(R4327)
When reassembling, be
sure not to get it stuck on
the spacer of the drain pan.
Front grille
Spacer
Spacer
(R17043)
Si04-751
Points
(R12715)
Section View
(R4590)
Removal Procedure

Advertisement

Table of Contents
loading

Table of Contents