Operation; Operating The Camera - Schick USBCam2 User Manual

Hide thumbs Also See for USBCam2:

Table of Contents

3. Operation

3.1.1. Turning the Camera On

3.1.2. Turning the Camera Off

NOTE: The camera turns off automatically after 5 minutes of continuous use.

Refer to the following sections for instructions on turning the

USBCam2 on and off, taking still images from streaming live video

("freeze-frame" capture), and the use of the Auto Advance feature.

Before turning on the camera make sure the cable connections are

secured. Turn on the camera by clicking the Power On/Off button

(Figure 7, item 2). Removing the handpiece from its holder also

turns the camera on.

When the camera's light is on, clicking the camera's Power On/Off

button (Figure 7, item 2) shuts power off to the camera. Clicking the

Power On/Off button restores power to camera and turns the LEDs

back on.

When not in use, store the camera in its holder to protect the device

and for easy access. Placing the camera in its holder turns off the

camera automatically.

B1051061 Rev. A

USBCam2 User Guide

Table of Contents