Table of Contents
Advertisement
S
4
TEP
Click Install.
S
5
TEP
A. Setup will copy the drivers to your
workstation.
B. If prompted, install Microsoft's DirectX.
S
6
TEP
A. Click Finish.
B. Connect the USBCam2 camera to your
computer. (For details, refer to
Section 2.5)
C. After a few seconds the message
"Device driver software installed
successfully" will appear momentarily
in the Windows System tray.
D. Remove USBCam2 Driver CD.
6
B1051061 Rev. A
USBCam2 User Guide
Advertisement
Table of Contents
