Table of Contents
Advertisement
2.6.2. Wall-Mounting Option (with Fasteners)
Figure 4. Handpiece Holder Wall Mounting Installation
USBCam2 User Guide
To install the handpiece to a wall or other vertical surface by its
holder (Figure 4), perform the following steps:
1. Remove the handpiece from its holder before performing this
procedure.
2. Position the holder on a smooth stable vertical surface.
3. Using the holes on the back of the holder as guides, fasten
the holder securely to the wall using 2 (#6 x 3/4) dry wall
screws (not supplied) or other hardware appropriate to the
mounting surface.
B1051061 Rev. A
11
Advertisement
Table of Contents
