During Operation; Care And Control Work; Maintenance And Repair Work; Structural Modifications - Schick Q3 Series Instructions Manual

During operation

Operate only with a sufficiently dimensioned extraction system and while wearing proper
protective clothing.
In left-hand rotation, the collet chuck may become loose when used with a
standard handpiece!

Care and control work

- in accordance with the operating manual
- trainees and interns must be instructed by an experienced operator

Maintenance and repair work

- Only by the manufacturer
- Only trained personnel with specialist knowledge of the respective device class may
implement configuration.

Structural modifications

Structural changes to the product are not permitted.
2.10

Upgrading and conversion

The control satellite of the QUBE and QUBE II series can be connected to the Q3 control
units.
When using the Q3 in the table version, an optional dynamic foot pedal and an on / off
pedal switch are available.
Issue Q3
General safety regulations 2