Schick USBCam2 User Manual page 7

Observe Proper PC Workstation Cleaning Methods
Disconnect Camera from USB Cable before Cleaning and Disinfecting
Always Use Sheaths with Sensors
Recommended Order for Connecting / Disconnecting Camera USB Cable
Product Manuals from Sirona Dental
USBCam2 User Guide
To avoid cross contamination, be sure to follow the cleaning
instructions provided by your computer manufacturer and
implement them as part of your normal routine for ensuring proper
sterilization and disinfectant of tools in your dental practice.
Be sure to disconnect the camera from its USB cable before
performing the cleaning and disinfecting steps. When the procedure
is complete, make sure the camera is completely dry before
reconnecting it.
Use Sirona Dental sheaths every time the USBcam4 is used. Never
use the intraoral camera without a protective sheath. Never use a
damaged sheath. Always dispose of the sheath after every patient.
Protective sheaths are single-use devices and must not be reused
under any circumstance. Reuse of single-use devices/instruments
may cause them to become contaminated, compromise their
intended function, and result in patient and user infection, injury
and/or illness.
Connect the USB cable to the camera handpiece before connecting
the cable to the PC workstation. This will prevent an unintended
shock hazard caused by the patient contacting the powered USB
cable accidentally.
Disconnect the USB cable from the PC workstation before
disconnecting the cable from the camera handpiece. This will
prevent an unintended shock hazard caused by the patient contacting
the powered USB cable accidentally.
The contents of this manual are subject to change without prior
notice. For the latest version of this user guide and other product
manuals from
website: www.schickbysirona.com
B1051061 Rev. A
Sirona Dental, please consult our
v