Recommended Disinfectant; Cleaning The Lens Surface; Cleaning The Computer - Schick USBCam2 User Manual

Hide thumbs Also See for USBCam2:

Table of Contents

5.3. Recommended Disinfectant

IMPORTANT! Before cleaning the lens, make sure it is free of any abrasive contaminants

as this will help prevent the formation of scratches during cleaning.

USBCam2 User Guide

seconds. Do not expose the camera cable connector to any

amount of liquid.

8. Repeat step 7. When the camera has been wiped two times,

continue with the following steps.

9. Remove potential chemical build-up from the camera by

wiping it with a sterile lap sponge saturated with de-ionized

water.

10. Use a sterile dry lap sponge to dry the camera or cable, as

needed.

11. Place the camera in a clean environment, ready for next use.

12. Reconnect the camera.

13. Remove and discard gloves.

The following surface disinfectant has been found to be effective in

achieving a desired level of disinfection and is available from

Patterson Dental and other suppliers.

• Cavi-Wipes (Metrex Research, Kerr) or equivalent

To clean the lens surface, moisten a soft cotton swab dipped in

rubbing (isopropyl) alcohol. Gently wipe the lens surface end-to-end

in straight lines without applying pressure; do not scrub. Allow the

alcohol to evaporate from the lens surface. Repeat these steps, as

needed, until the lens surface is clean.

To avoid cross contamination, follow the cleaning instructions

provided by your computer manufacturer and implement them as

part of your normal routine for ensuring proper sterilization and

disinfectant of tools in your dental practice.

B1051061 Rev. A

Table of Contents