Page 3
About this operating manual 1 Contents About this operating manual ..................6 General notes ....................... 6 Related documentation ....................6 Signs and symbols used ....................6 Structure of warnings ....................6 Technical terms and abbreviations used ............... 8 General safety regulations ..................8 Principles ........................
Page 4
Control satellite (optional, not included in delivery) ..........18 Power stick (optional, not included) ................ 18 Functions and operation ..................19 Control units Q3 on / off ....................19 Operating concept and OLED display ................. 19 Operating the handpiece and controller ..............20 Speed control function ....................
Page 5
About this operating manual 1 Tool change on handpiece ..................21 Troubleshooting ....................... 22 10.1 How to proceed in case of malfunctions and errors ............. 22 10.2 Fault and error messages ................... 22 Care and control tasks for operators ..............24 11.1 General information ....................
Page 7
About this operating manual 1 Warning levels Signal word Use in case of ... Possible conse- quences if the safety advice is not ob- served: DANGER Personal injury Death or severe injuries! (imminent danger) WARNING Personal injury Death or severe injuries! (potentially hazardous situation) CAUTION...
Page 8
2 General safety regulations Abbreviation Explanation Motor handpiece Knee control Foot control Table control Tab. 1.2 used abbreviations...
Page 24
11 Care and control tasks for operators Care and control plan for the handpiece: Interval Care and inspection tasks Remarks Weekly Dismantle the tip and remove dirt Do not use compressed air! Once a Dismantle the collet chuck, clean and lubricate Lubricate with Article no.
Page 25
Care and control tasks for operators 11...
Page 26
11 Care and control tasks for operators...
Page 27
1.360 g 2.300 g 1.880 g Satellite (optional) broad 84 mm height 60 mm depth 115 mm weight 280 g Operating voltage 100 - 240 volts Output Q3 Basic 100 watts, Q3 Profi 150 watts, Q3 Premium 200 watts...
Page 28
Schick GmbH assumes no responsibility for possible errors in this documentation. In no event shall Schick GmbH be liable for damages or consequential damages Schick GmbH resulting from the use of this documentation or the hardware and software de- Lehenkreuzweg 12 scribed herein.
Page 29
Annex 13 Q3 consists of Q handpiece 10720, 9300, 9400/3, 9400/13 combined with Q3 control unit 10705, 10705/1, 10705/2, 10710, 10710/1, 10710/2, 10715, 10715/1 und 10715/2 Foot pedal switch (on / off) 6370/2 Dynamic foot control 9440...
Need help?
Do you have a question about the Q3 and is the answer not in the manual?
Questions and answers