baltur TBL 210P Original Instructions Manual page 59

CAUTION / WARNINGS
The housings for the cables for the plugs are provided
respectively for cable Ø 9.5÷10 mm and Ø 8.5÷9 mm,
this ensures the protection rating is IP 54 (Standard IEC
EN60529) for the electrical panel.
• To reclose the electrical panel lid, fix the screws (1) with a
torque of about 5 Nm to ensure the correct seal.
To gain access to the control panel (8), slide the transparent
door (7) for a short distance following the direction on the arrow
indicated in the figure exerting slight pressure with a tool (e.g. a
screwdriver) following the arrows' direction and slide it for a short
distance to separate it from the cover.
• To secure the transparent door on the panel properly, position
the hooks at their hooking points (9), slide the door in the
direction indicated by the arrow until you hear a click that
ensures its seal.
CAUTION / WARNINGS
Only professionally qualified personnel may open the
burner electrical switchboard.
9
19 / 38
0006081053_201805
ENGLISH
8
7
9
9
9