Digigram IQOYA *SERV/LINK User Manual page 64

Digital Level (dB)
Serial data destination
Routing of tunneled status
data: Status data indexes
Routing of tunneled status
data: GPO inversion mask
Source Type = IP service, and IP service is UDP
In UDP mode, the audio format has to be declared.
Source Type = IP service, and IP is a WEB radio
Parameter
Read/Write Digital gain applied to the audio samples on this priority.
Read/Write In case serial data are tunneled in-band, select the COM port to output
them. COM ports are available if the RS232 ports hardware option is
present.
Read/Write Select the GPOs that will reflect the tunneled GPIs statuses.
Select the GPI status by clicking on its index, and enter the GPO number
that will reflect the GPI.
Make sure the selected GPI indexes match the GPI numbers set in the IP
service parameters of the *SERV/LINK that sends the stream.
Read/Write Check the box under a GPO so that it reflects the inverted status of the
tunneled GPI.
Type Description
IQOYA *SERV/LINK user manual
64