Digigram IQOYA *SERV/LINK User Manual page 32

9.1.3. Preferences -> Network
9.1.3.1. Preferences -> Network-> Eth0 / Eth1
These two pages allow configuring the two network ports of IQOYA *SERV/LINK.
Click on a parameter field ("Status" for instance) to enter the editing mode.
Parameter
Internet interface name
Status
Speed and duplex mode obtained
Speed and duplex mode asked
This menu allows accessing the network configuration of IQOYA.
Type Description
Read Displays the name of the Eth port: Eth0 or Eth1
Read/Write This parameter allows enabling/disabling the interface
Default value=Running
Possible values:
Running: Eth port is enabled.
Stopped; Eth port is disabled
Read Displays the current speed and mode of the Eth interface.
Read/Write Allows selecting the working mode of the Eth interface. Possible
values are as follows:
IQOYA *SERV/LINK user manual
32