Digigram IQOYA *SERV/LINK User Manual page 61

FEC stream parameters
Type
Payload type
Advanced mode
IP address
Listening port
Click on "Save" to confirm the settings.
9.4.2. Receive-> Programs
Output programs are composed of a list of audio sources organized in priorities. Up to 3 decoding priorities can
be defined. The highest priority is priority 1. If the audio source of priority 1 is lost, IQOYA switches to priority 2 if
the corresponding audio source is available, or to priority 3 if the corresponding audio source is available. If no
declared audio source is available, the program output is silent.
Output programs configuration is accessible either from the left column
icon "Go to IP Service" on the top right of the IP Services
Type Description
Read/Write Select the FEC that is configured on the encoder of the received IP
stream.
Read/Write Enter the same FEC payload type that is configured on the encoder of the
received IP stream.
Read/Write Select "Yes" if the FEC destination IP address is not the same as the IP
stream destination IP address, or of it is to be received on a UDP port
different from "IP stream UDP port +2"
Read/Write Displayed if Advanced mode is set to "Yes".
In unicast, set the IP address to 127.0.0.1.
In multicast, enter the multicast IP address.
Read/Write Displayed if Advanced mode is set to "Yes".
Enter the UDP port for receiving the FEC.
IQOYA *SERV/LINK user manual
.
, or directly from the
61