Digigram IQOYA *SERV/LINK User Manual page 31

IQOYA *SERV/LINK user manual
9.1.2.4. Preferences -> Services -> SNMP
This page allows setting the SNMP parameters.
It also displays the System group MIB-II information.
IQOYA can be controlled and monitored via SNMP (SET, GET, Traps) provided that the SNMP service is
activated.
IQOYA can send the SNMP traps to up to 5 SNMP supervisors (Trap addresses 1 to 5).
Click on "Apply" to confirm the settings.
9.1.2.5. Preferences -> Services -> HTTPS
This page allows setting a bandwidth limitation to the HTTP traffic.
In case the IP audio stream takes almost all the available network bandwidth, the HTTP traffic generated when
accessing the WEB pages may disturb the IP audio frames transmission, because the total bandwidth necessary
for the IP audio stream plus HTTP traffic may exceed the available network bandwidth.
To avoid this problem, IQOYA offers the possibility to set a bandwidth limitation for the HTTPS traffic.
Click on the "Maximum bit rate" field, and enter the maximum bit rate allowed for HTTPS traffic.
Default value is 0, which means no limitation on HTTPS traffic.
Click on "Apply" to confirm the settings.
31