Digigram IQOYA *SERV/LINK User Manual page 18

7. Accessing IQOYA *SERV/LINK WEB pages
From a WEB browser, connect to the IQOYA *SERV/LINK WEB pages:
● for a network connection through Eth0 port, enter https://192.168.0.100 (this is the default IP address of
Eth0).
● for a network connection through Eth1 port, enter https://192.168.1.100 (this is the default IP address of
Eth1).
The WEB browser displays a message about security certificate. Select the option that allows to continue with
this WEB server.
Enter the requested username and password. The default administrator login is:
username = iqoya
password = iqoya
IQOYA *SERV/LINK supports three categories of users: Administrator, User, Read only
● "Administrator" category
A user from the "Administrator" category has all the access rights on the WEB pages.
The login to the embedded WEB server as "Administrator" is:
- username: iqoya
- default password: iqoya
Password can only be modified when logged as Administrator.
● "User" category
A user from the "User" category has limited access rights. "Write" access is limited to the audio
parameters (audio format, source/target IP address and UDP port).
The login to the embedded WEB server as "User" is:
- username: user
- default password: user
Password can only be modified when logged as Administrator. Old password must be entered before
entering the new one.
● "Read-only" category
A user from the Read-only category only has "Read" access rights. He cannot modify a single parameter
of the codec.
The login to the embedded WEB server as "Read-only" is:
- username: guest
- default password: guest
Password can only be modified when logged as Administrator. Old password must be entered before
entering the new one.
Once the login has passed, the "Properties" WEB page is displayed. This is the home page.
IQOYA *SERV/LINK user manual
18