Digigram IQOYA *SERV/LINK User Manual page 34

Click on "+Add VLAN" to declare a new VLAN.
Parameter
Network interface
VLAN ID
Name
Status
Priority
IPv4 address
Netmask
9.1.3.3. Preferences -> Network-> IP routing
This page allows viewing the current IP routing table, downloading it, and uploading a modified IP routing table.
Type Description
Read/Write Select the network interface that will support the VLAN (Eth0, or Eth1)
Read/Write Enter the VLAN ID in the ranges [1-1001] [1006-4095]
Read/Write Enter a logical name for this VLAN
Read/Write Allows enabling/disabling this VLAN.
Select "Running" to enable this VLAN.
Select "Stopped" to disable this vLAN.
Read/Write Enter the VLAN priority in the range [0-7].
Read/Write Enter the IP address of the selected Eth port in this VLAN.
If no value is entered, the IP address is the IP address of the selected
Eth port.
Read/Write Enter the netmask for this VLAN interface.
If no value is entered, the netmask is the same as the selected Eth port
netmask.
IQOYA *SERV/LINK user manual
34