9.2.2.2. Audio I/O->Output-> settings
This page allows the following:
● assign a physical output to a decoder output signal
● naming of the encoder outputs
For analog & AES/EBU *SERV/LINK versions, output type is "Line+AES": output signal is sent on both analog
and digital outputs..
For AES/EBU only *SERV/LINK versions, output type is "AES".
For MADI versions, it is possible to select the MADI channel associated to the output signal.
Click on the name of an output (below an XLR icon) to be able to select the audio output and change the output
name.
Click on "Apply" to confirm the changes.
IQOYA *SERV/LINK user manual
43
Need help?
Do you have a question about the IQOYA *SERV/LINK and is the answer not in the manual?