Digigram IQOYA *SERV/LINK User Manual page 46

To edit an existing Program, click on the icon
A new program can be created by duplicating one of the displayed programs; click on the icon
program to be duplicated.
Parameter
Name
Input type
First channel
Mode
Sample rate
Encoding format
Bit rate
Click on Save button to confirm the new Program.
To delete one or several unused programs, select them by clicking on the icon
click on the button
in the left side of the Program line.
Type
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
on the top of the Programs list.
IQOYA *SERV/LINK user manual
Give a unique name to the program.
Click on "Save" to confirm the parameters.
Click on "Close" to discard the changes.
Click on "Save & New" to confirm the settings,and
duplicate
them so that to create a new program with similar
settings, except the name.
Description
Name given to the encoding instance. This name will be selected
when declaring an IP service.
Audio source of the program: it can be an audio input, or an audio
bus.
First input channel of the audio signal to be encoded, to be
selected among the list of input channels.
Mono, Stereo, Multi-channel 5.1
Frequency of the encoded audio, to be selected from the list box.
It may be different from the IQOYA sampling frequency)
Audio format of the encoding, to be selected from the list box.
Bit rate of the encoded audio.
in front of the
on the left of their names, and
46