Digigram IQOYA *SERV/LINK User Manual page 25

9.1.1.4. Preferences -> System -> Alarms setup
Each alarm occurring on IQOYA can be written in a log file, or/and sent to a GPO, or/and signalled as an SNMP
trap (not available in the first firmware version).
The "Alarms setup" page allows enabling/disabling each alarm notifications
Available alarms
System log cleared
Eth0 cable unplugged
Eth1 cable unplugged
Clock sync failed
Audio clock failed
Redundant power
supply failed
Temperature failed
Fan failed
Serial input silent
Log file has been
cleared
No connection of Eth0
No connection of Eth1
External synchro failure
(PTP, NTP)
Audio sampling clock
failure
PSU failure
Temperature too high
Internal fan failure
IQOYA *SERV/LINK user manual
Click on a parameter field to be able to
change the values.
Click on "Apply" to confirm your changes.
Receive failed
Receive main source failed
Receive backup source failed
Receive secondary backup source
failed
Receive sync failed
Receive main source disabled
Receive backup source disabled
Receive secondary backup source
No available defined IP
stream on the output
program
Priority 1 of the output
program is not available
Priority 2 of the output
program is not available
Priority 3 of the output
program is not available
Priority 1 on the output
program is disabled
Priority 2 on the output
program is disabled
Priority 3 on the output
25