Digigram IQOYA *SERV/LINK User Manual page 36

To modify the parameters of a COM port, click on its
Parameter
Device name
Data transmission mode
Baud rate
Data bits
Stop bits
Type
Read
Read/Write
Read/Write
Read/Write
Read/Write
IQOYA *SERV/LINK user manual
icon on the left column.
Description
Name of the RS232 port
Defines the way serial data are inserted into the IP audio stream.
Generic: serial data are inserted as they arrive.
UECP: serial data are inserted each time a complete RDS UECP
frame is fully received from the RS232 port.
Serial port baud rate in bits/s, from 1200 bps to 40 Kbits/s
Select the number of bits for each character (6, 7 or 7)
Enter the number of bits used to signal the end of a character: 1 or 2.
36