9.2.1.2. Audio I/O->Input-> settings
This page allows the following:
●
select the input signals to be allocated to the encoder inputs
●
naming of the encoder inputs
For analog & AES/EBU *SERV/LINK versions, input type can be "Line", "AES" or "AES+SRC" (choice is valid for
two consecutive channels).
For AES/EBU only *SERV/LINK versions, input type can be "AES" or "AES+SRC" (choice is valid for two
consecutive channels).
For MADI versions, it is possible to select the MADI channel associated to the input.
AES+SRC means that the hardware sample rate converter of the AES/EBU input is enabled. This is useful when
the AES/EBU audio signal is not synchronous of the reference sampling clock
IQOYA *SERV/LINK user manual
40