Matrox Radient eCL Series Installation And Hardware Reference page 9

Data
Camera Link
Clock
Interface
CC (4)
with PoCL
UART
Data
Camera Link
Clock
Interface
CC (4)
with PoCL
UART
LVDS Aux In (2)
LVDS Aux Out (1)
Auxiliary I/O
TTL Aux I/Os (3) interface
Opto Aux In (2)
Data
Camera Link
Clock
Interface
CC (4)
with PoCL
UART
Data
Camera Link
Clock
Interface
CC (4)
with PoCL
UART
LVDS Aux In (2)
LVDS Aux Out (1)
Auxiliary I/O
TTL Aux I/Os (3) interface
Opto Aux In (2)
LVDS Aux In (2)
LVDS Aux Out (1)
Auxiliary I/O
TTL Aux I/Os (3)
interface
Opto Aux In (2)
LVDS Aux In (2)
LVDS Aux Out (1)
Auxiliary I/O
TTL Aux I/Os (3)
interface
Opto Aux In (2)
1 Note that, without the expansion module, this is a flow diagram of
Matrox Radient eCL-DB.
With the expansion module, this is a flow diagram of Matrox Radient
eCL-QB. eCL-DB is not upgradable to eCL-QB; the eCL-DB does not
have the required connector for the eCL-QB module.
Main On-board Memory
(DDR-667 SDRAM)
AC 0
AC 1
Acquisition
Controller
Up to
2 GB/s
AC 2
AC 3
MIL license
fingerprint
and
Supplemental MIL
license storage
Matrox Radient eCL boards
2 GB
Up to
10.6 GB/s
Altera Stratix III
Processing FPGA
(customizable)
Memory Processing
Controller Units
Up to
10.6 GB/s
Up to1 GB
Up to
1 GB
Up to Up to
2 GB/s 2 GB/s
Host Interface
Color space
DMA DMA
converter &
Read Write
pixel
formatter
Up to Up to
2 GB/s 2 GB/s
Host x8 PCIe bus
9
Optional
Dedicated
Processing
Memory
(QDR-II SRAM
250 MHz)
4 or 8 MB
4 or 8 MB
4 or 8 MB
4 or 8 MB
Total of
up to 4.0 GB/s write
and
up to 4.0 GB/s read
Matrox Radient
eCL-DB/QB