Matrox Radient eCL Series Installation And Hardware Reference page 26

26 Chapter 2: Hardware installation
Warning
Attach video sources to Matrox Radient eCL as follows:
M a t r o x C a m e r a L i n k
R a d i e n t c o n n e c t o r 0
b o a r d
e C L - D B V i d e o s o u r c e 0 i n
B a s e c o n f i g u r a t i o n
e C L - Q B V i d e o s o u r c e 0 i n
B a s e c o n f i g u r a t i o n
e C L - S F V i d e o s o u r c e 0 i n M e d i u m o r F u l l c o n f i g u r a t i o n
e C L - D F V i d e o s o u r c e 0 i n M e d i u m o r F u l l c o n f i g u r a t i o n V i d e o s o u r c e 1 i n M e d i u m o r F u l l c o n f i g u r a t i o n
Acq.
Path 0
Acq.
Path 0
Acq.
Path 1
Matrox
Radient
eCL-DB
❖ When connecting a video source in Full configuration, ensure that you are
connecting its cables to the appropriate connector. Accidentally connecting the
cables to the wrong connector can damage the board or your video source. Pins
2-5 and pins 15-18 are output pins on the top connector (0 and 2), while they
are input pins on the bottom connector (1 and 3).
C a m e r a L i n k
c o n n e c t o r 1
V i d e o s o u r c e 1 i n
B a s e c o n f i g u r a t i o n
V i d e o s o u r c e 1 i n
B a s e c o n f i g u r a t i o n
Acq.
Path 0
Acq.
Path 1
Matrox
Matrox
Radient
Radient
eCL-SF
eCL-QB
C a m e r a L i n k C a m e r a L i n k
c o n n e c t o r 2 c o n n e c t o r 3
- -
V i d e o s o u r c e 2 i n V i d e o s o u r c e 3 i n
B a s e c o n f i g u r a t i o n B a s e c o n f i g u r a t i o n
- -
Acq.
Path 2
Acq.
Path 0
Acq.
Path 3
Matrox
Radient
eCL-DF
- -
- -
Acq.
Path 1