Table of Contents
Advertisement
16 Chapter 1: Introduction
Warning
More information
Available separately
You might have also ordered one or more of the following:
• MIL or MIL-Lite. Matrox Intellicam is included with both of these software
packages.
❖ If needed, you can purchase a 26-pin high-density male mini Camera Link or
PoCL-compliant Camera Link cable (HDR or SDR) from the video source
manufacturer, Components Express inc., 3M Interconnect Solutions for Factory
Automation, Intercon 1, or other third parties.
Handling components
The electronic circuits in your computer and the circuits on Matrox Radient eCL
are sensitive to static electricity and surges. Improper handling can seriously
damage the circuits. Be sure to drain static electricity from your body by touching
a metal fixture (or ground) before you touch any electronic component. In
addition, do not let your clothing come in contact with the circuit boards or
components.
Before you add or remove devices from your computer, always turn off the power
to your computer and all peripherals.
Installation
The installation procedure consists of the following steps:
1. Complete the hardware installation procedure described in Chapter 2: Hardware
installation.
2. Complete the software installation procedure described in the documentation
accompanying your software package.
For information on using multiple Matrox Radient eCL boards, refer to Chapter
3: Using multiple Matrox Radient eCL boards.
For in-depth hardware information, refer to Chapter 4: Matrox Radient eCL
hardware reference; whereas for a summary of this information, as well as
environmental and electrical specifications, and connector pinout descriptions,
see Appendix B: Technical information.
Advertisement
Table of Contents
Need help?
Do you have a question about the Radient eCL Series and is the answer not in the manual?