Inspecting The Matrox Radient Ecl Package; Standard Items - Matrox Radient eCL Series Installation And Hardware Reference

Matrox does not guarantee compatibility with all computers that have the above
specifications. Please consult with your local Matrox Imaging representative, local
Matrox Imaging sales office, the Matrox web site, or the Matrox Imaging
Customer Support Group at headquarters before using a specific computer.
Consult your software package for other computer requirements (for example,
operating system and memory requirements).

Inspecting the Matrox Radient eCL package

You should check the contents of your Matrox Radient eCL package when you
first open it. If something is missing or damaged, contact your Matrox
representative.

Standard items

You should receive the following items:
• The Matrox Radient eCL board, depending on which was purchased. If
Matrox Radient eCL-QB or eCL-DF was purchased, the appropriate expansion
module will be installed on the main board. Note that eCL-DB and eCL-SF are
not upgradable to eCL-QB and eCL-DF, respectively; the eCL-DB and eCL-SF
do not have the required connector for the expansion module.
• A Matrox Radient eCL cable adapter bracket with two DB-15 auxiliary I/O
connectors. These connectors allow access from outside the computer enclosure
to the auxiliary I/O signals of the internal auxiliary I/O connector.
Inspecting the Matrox Radient eCL package 15