Matrox Radient eCL Series Installation And Hardware Reference page 10

10 Chapter 1: Introduction
Data
Clock
CC (4)
UART
Data
Clock
LVDS Aux In (2)
LVDS Aux Out (1)
TTL Aux I/Os (3)
Opto Aux In (2)
Data
Clock
CC (4)
UART
Data
Clock
LVDS Aux In (2)
LVDS Aux Out (1)
TTL Aux I/Os (3)
Opto Aux In (2)
LVDS Aux In (2)
LVDS Aux Out (1)
TTL Aux I/Os (3)
Opto Aux In (2)
LVDS Aux In (2)
LVDS Aux Out (1)
TTL Aux I/Os (3)
Opto Aux In (2)
1 Note that, without the expansion module, this is a flow diagram of Matrox
Radient eCL-SF.
With the expansion module, this is a flow diagram of Matrox Radient eCL-
DF. Matrox Radient eCL-SF is not upgradable to eCL-DF; the eCL-SF does
not have the required connector for the eCL-DF module.
Camera Link
Interface AC 0
with PoCL
Camera Link
Interface
with PoCL
Acquisition
Auxiliary I/O
Controller
interface
Camera Link
Interface
AC 1
with PoCL
Camera Link
Interface
with PoCL
Auxiliary I/O
interface
Auxiliary I/O
interface
Supplemental MIL
Auxiliary I/O
interface
Main On-board Memory
(DDR-667 SDRAM)
2 GB
Up to
2 GB/s
Memory
Controller
Up to
2 GB/s
MIL license
fingerprint
and
Up to
license storage
2 GB/s
a
Up to
10.6 GB/s
Altera Stratix III
Processing FPGA
(customizable)
Processing
Units
Up to
10.6 GB/s
Up to1 GB
Up to
1 GB
Up to
2 GB/s
Host Interface
Color space
DMA DMA
converter &
Read Write
pixel
formatter
Up to
2 GB/s
Host x8 PCIe bus
Optional
Dedicated
Processing
Memory
(QDR-II SRAM
250 MHz)
4 or 8 MB
4 or 8 MB
4 or 8 MB
4 or 8 MB
Total of
up to 4.0 GB/s write
and
up to 4.0 GB/s read
Matrox Radient
eCL-SF/DF