Installing The Drive Vertically, Frame R5 - ABB ACH580-01 Hardware Manual


Installing the drive vertically, frame
Select fasteners and their application to meet local requirements appropriate to wall
surface materials, drive weight and application.
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
locations are also shown in the drawings in chapter
309.
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes. Start the two upper bolts and the two
lowest bolts into the anchors or plugs.
1
c
R5: M6 (¼ in)
2
×6
×2
a
b
c
d >
e >
×2
×2
3
×2
Mechanical installation 75
R5
Dimension drawings
R5 IP21 (UL Type 1) R5 IP55 (UL Type 12)
mm in
612 24.09
581 22.87
160 6.30
200 7.87
100 3.94
R5 IP21 (UL Type 1) R5 IP55 (UL Type 12)
kg lb
28.3 62.4
×2
on page
mm in
612 24.09
581 22.87
160 6.30
200 7.87
100 3.94
kg lb
29.0 64.0