Installing The Drive Vertically, Frames R6 - ABB ACH580-01 Hardware Manual

78 Mechanical installation

Installing the drive vertically, frames
Select fasteners and their application to meet local requirements appropriate to wall
surface materials, drive weight and application.
1. Mark the hole locations for the six mounting holes using the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings in
chapter Dimension drawings
Note: You can use only two bolts instead of four to attach the lower part of the drive.
1
c
2. Drill the mounting holes.
3. Insert fixing anchors or plugs into the holes and start the bolts into the anchors or
plugs.
4. Position the drive onto the bolts on the wall. Lift the drive with a lifting device as it
is heavy.
5. Tighten the top two bolts in the wall securely.
R6...R9: M8 (5/16) in
2
×6
on page 309.
mm
a 571 22.5 623 24.5 701
b 531 20.9 583 23.0 658
c 213
d 300 11.8 300 11.8
e 155
× 4
IP21,
kg
UL Type 1
42.4 93.5
IP55,
kg
UL Type 12
43.0 94.8
3
× 2
R6...R9
R6 R7
in mm in mm
8.4 245 9.7 263
300
6.1 155 6.1 155
lb kg lb kg
54 119.1 69
lb kg lb kg
56 123.5 77
4
× 2
R8 R9
in mm in
27.6 718 28.3
25.9 658 25.9
10.3 345 13.6
11.8 300 11.8
6.1 200 7.9
lb kg lb
152.2 97 213.9
lb kg lb
169.8 103 227.1
5