Cisco ASR 9000 Series Service Configuration Manual page 67

Configuring Modular QoS Congestion Management on Cisco ASR 9000 Series Routers
Command or Action
Step 7
bandwidth { rate [ units ]| percent
percentage-value }
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
percent 40
Step 8
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 9
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class-default
Step 10
bandwidth { rate [ units ]| percent
percentage-value }
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
percent 20
Step 11
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 12
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap)# exit
Step 13
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
gigabitethernet 0/2/0/0
Step 14
service-policy {input | output} policy-map
Example:
RP/0/RSP0/CPU0:router(config-if)#
service-policy output policy1
OL-23108-02
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
How to Configure QoS Congestion Management on Cisco ASR 9000 Series Routers
Purpose
Enters policy map class configuration mode.
• Specifies the bandwidth allocated for a class belonging
to a policy map.
• In this example, class class2 is guaranteed 40 percent of
the interface bandwidth.
Returns the router to policy map configuration mode.
Specifies the name of the class whose policy you want to
create or change.
Enters policy map class configuration mode.
• Specifies the bandwidth allocated for a class belonging
to a policy map.
• In this example, class class-default is guaranteed 20
percent of the interface bandwidth.
Returns the router to policy map configuration mode.
Returns the router to global configuration mode.
Enters interface configuration mode and configures an
interface.
Attaches a policy map to an input or output interface to be
used as the service policy for that interface.
In this example, the traffic policy evaluates all traffic
•
leaving that interface.
QC-53