Cisco ASR 9000 Series Service Configuration Manual page 42

How to Configure Modular QoS Packet Classification and Marking on Cisco ASR 9000 Series Routers
Restrictions
Shared policy instance across multiple physical interfaces is not supported.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
interface Bundle-Ether bundle-id
Example:
RP/0/RP1/CPU0:router(config)# interface
Bundle-Ether 100.1 l2transport
Step 3
service-policy {input | output} policy-map
[shared-policy-instance instance-name ]
Example:
RP/0/RSP0/CPU0:router(config-if)#
service-policy output policy1
shared-policy-instance Customer1
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
QC-28
Configuring Modular QoS Service Packet Classification and Marking on Cisco ASR 9000 Series Routers
configure
interface Bundle-Ether bundle-id
service-policy {input | output} policy-map [shared-policy-instance instance-name]
end
or
commit
show policy-map shared-policy-instance instance name [input | output] location location-id
Purpose
Enters global configuration mode.
Enters interface configuration mode and configures a
bundle interface.
Attaches a policy map to an input or output bundle interface
to be used as the service policy for that subinterface.
In this example, the traffic policy evaluates all traffic
•
leaving that interface.
OL-23108-02