Cisco ASR 9000 Series Service Configuration Manual page 99

Configuring Modular QoS Congestion Avoidance on Cisco ASR 9000 Series Routers
Command or Action
Step 11
end
or
commit
Example:
RP/0/RSP0/CPU0:router(config-cmap)# end
or
RP/0/RSP0/CPU0:router(config-cmap)# commit
OL-23108-02
How to Configure Modular QoS Congestion Avoidance on Cisco ASR 9000 Series Routers
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
Purpose
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
QC-85