Cisco ASR 9000 Series Service Configuration Manual page 69

Configuring Modular QoS Congestion Management on Cisco ASR 9000 Series Routers
14.
15.
16.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
policy1
Step 3
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class1
Step 4
bandwidth remaining percent percentage-value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
remaining percent 40
Step 5
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 6
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class2
Step 7
bandwidth remaining percent percentage-value
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# bandwidth
remaining percent 40
Step 8
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
OL-23108-02
service-policy {input | output} policy-map
end
or
commit
show policy-map interface type instance [input | output]
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
How to Configure QoS Congestion Management on Cisco ASR 9000 Series Routers
Purpose
Enters global configuration mode.
Enters policy map configuration mode.
Creates or modifies a policy map that can be attached to
•
one or more interfaces to specify a service policy.
Specifies the name of the class whose policy you want to
create or change.
Specifies how to allocate leftover bandwidth for class
class1.
Returns the router to policy map configuration mode.
Specifies the name of the class whose policy you want to
create or change.
Specifies how to allocate leftover bandwidth for class
class2.
Returns the router to policy map configuration mode.
QC-55