Cisco ASR 9000 Series Service Configuration Manual page 147

Configuring Hierarchical Modular QoS on Cisco ASR 9000 Series Routers
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
bottom-child
Step 3
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
Bronze
Step 4
shape average {percent percentage | rate
[ units ]}
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# shape
average 1 mbps
Step 5
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 6
policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)#
policy-map Top-Parent
Step 7
class class-default
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class-default
OL-23108-02
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
How to Configure Hierarchical QoS
Purpose
Enters global configuration mode.
Creates or modifies the bottom-level policy.
Assigns the traffic class that you specify to the
policy map. Enters policy map class configuration
mode.
Shapes traffic to the indicated bit rate.
Exits policy map class configuration mode.
Creates or modifies the top-level policy.
Configures or modifies the parent class-default
class.
You can configure only the class-default
Note
class in a parent policy. Do not configure
any other traffic class.
QC-133