Cisco ASR 9000 Series Service Configuration Manual page 131

Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Level: 1 Policy: child-3play Class: class-default
Parent Policy: parent-3play-subscriber-line Class: class-default
QueueID: 139 (Priority Normal)
Queue Limit: 65 kbytes Profile: 1 Scale Profile: 3
WFQ Profile: 0 Committed Weight: 1 Excess Weight: 1020
Bandwidth: 0 kbps, BW sum for Level 1: 200000 kbps, Excess Ratio: 1
----------------------------------------------------------------------
Once the ANCP rate returns to the configured value, the inconsistency is automatically cleared, which
can be confirmed by issuing the show qos interface command.
If the ANCP rate has been configured to a value less than the shape rate, the inconsistency is not
Note
automatically cleared, and the policy must be modified and reapplied. To prevent this from occurring,
be sure to configure the policy-map shape rate to the minimum value of all ANCP rates for a given
service level.
Port Speed Change
If the port speed is configured to less than the QoS parent shaper rate for example to 100 Mbps (100000
kbps), the requirement is no longer met since the port speed is no longer greater than the QoS parent
shaper rate of 800000 kbps.
RP/0/RSP0/CPU0:ro-node1#conf
RP/0/RSP0/CPU0:ro-node1(config)#int gigabitEthernet 0/0/0/1
RP/0/RSP0/CPU0:ro-node1(config-if)#speed 100
RP/0/RSP0/CPU0:ro-node1(config-if)#commit
LC/0/0/CPU0:Nov
inconsistency detected due to ANCP or Bandwidth modification. Execute show qos
inconsistency, to obtain information. Policy resolution failure
RP/0/RSP0/CPU0:ro-node1(config-if)#end
This causes the QoS policy on the interface to be placed in the inconsistency state as shown by the
following show qos interface command output:
RP/0/RSP0/CPU0:ro-node1#sh qos int gigabitEthernet 0/0/0/1.1 output
Interface: GigabitEthernet0_0_0_1.1 output Bandwidth: 1000000 kbps ANCP: 0 kbps
*Inconsistency* :
Policy: parent-3play-subscriber-line Total number of classes: 5
----------------------------------------------------------------------
Level: 0 Policy: parent-3play-subscriber-line Class: class-default
QueueID: N/A
Shape Profile: 1 CIR: 200000 kbps (200 mbps)
CBS: 100352 bytes PIR: 800000 kbps PBS: 10027008 bytes
WFQ Profile: 1 Committed Weight: 51 Excess Weight: 100
Bandwidth: 200000 kbps, BW sum for Level 0: 1000000 kbps, Excess Ratio: 100
----------------------------------------------------------------------
Level: 1 Policy: child-3play Class: 3play-voip
Parent Policy: parent-3play-subscriber-line Class: class-default
QueueID: 640 (Priority 1)
Queue Limit: 16 kbytes Profile: 3 Scale Profile: 0
Policer Profile: 0 (Single)
Conform: 65 kbps (65 kbps) Burst: 1598 bytes (0 Default)
Child Policer Conform: TX
Child Policer Exceed: DROP
Child Policer Violate: DROP
----------------------------------------------------------------------
Level: 1 Policy: child-3play Class: 3play-video
Parent Policy: parent-3play-subscriber-line Class: class-default
QueueID: 641 (Priority 2)
OL-23108-02
4 05:36:55.041 : qos_ma_ea[197]: %QOS-QOS_EA_MODIFY_FAIL-3-ERROR :
Port speed modify fails on Policy
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
Configuration Examples for Configuring ANCP on Cisco ASR 9000 Series Routers
QC-117