Cisco ASR 9000 Series Service Configuration Manual page 152

How to Configure Hierarchical QoS
8.
9.
10.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
Business
Step 3
class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
Gold
Step 4
police rate { value [ units ] | percent
percentage } [burst burst-size
[ burst-units ]] [peak-rate value [ units ]]
[peak-burst peak-burst [ burst-units ]]
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
police rate percent 10
Step 5
exit
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# exit
Step 6
policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
All_Traffic
Step 7
class class-default
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class-default
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
QC-138
(Optional) police rate {value [units] | percent percentage} [burst burst-size [burst-units]]
[peak-rate value [units]] [peak-burst peak-burst [burst-units]]
service-policy policy-map-name
end
or
commit
Configuring Hierarchical Modular QoS on Cisco ASR 9000 Series Routers
Purpose
Enters global configuration mode.
Creates or modifies a bottom-level policy.
Assigns the traffic class you specify to the policy
map. Enters policy map class configuration mode.
(Optional) Configures traffic policing and enters
policy map police configuration mode.
Exits policy map class configuration mode.
Creates or modifies a top-level policy.
Configures or modifies the default traffic class.
OL-23108-02