Mme Service Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

Chapter 13

MME Service Thresholds

MME Service thresholds generate alerts or alarms for the average number of calls setup. A threshold can be configured
to report this information on entire system for MME service. Thresholds can also be configured for session registration
response failures, discarded interface registration requests, discarded network entry registration acknowledgments for
MME services.
Alerts or alarms are triggered for these MME thresholds based on the following rules:
Enter condition: When the actual average of call setups or actual number of failures or discards passes, or is
equal to, the configured Threshold value an alert or alarm is set.
Clear condition: When the actual average of call setups or actual number of failures or discards passes below
the Threshold value the alert or alarm is cleared.
If a trigger condition occurs within the polling interval, the alert or alarm is not generated until the end of the polling
interval.
OL-25552-02
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
87