Cisco ASR 5000 Series Thresholding Configuration Manual page 82

▀ HA Service-Level HA Service Thresholds
Method Description
IP address The following thresholds can be configured for each IP address pool:
pool-level
Percent-available for the group that the IP pool belongs to;
Percent-free;
Percent-hold;
Percent-release; and
Percent-used.
Thresholds configured for individual pools take precedence over the context-level threshold that
would otherwise be applied (if configured). In the event that two IP address pools belonging to
the same pool group are configured with different group-available thresholds, the system uses
the pool configuration that has the Enter condition that would be encountered first for the entire
group.
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
82
IP Pool Utilization Thresholds
To configure, go
to section:
IP Address Pool-
Level Thresholds
OL-25552-02