Total P-Gw Session Thresholds; Configuring Total P-Gw Session Thresholds - Cisco ASR 5000 Series Thresholding Configuration Manual

▀ Total P-GW Session Thresholds

Total P-GW Session Thresholds
Total P-GW session thresholds generate alerts or alarms based on the total number of sessions facilitated by all P-GW
services configured on the system during the specified polling interval.
Alerts or alarms are triggered for the total of all P-GW sessions based on the following rules:
Enter condition: Actual total number of sessions > or = High Threshold
Clear condition: Actual total number of sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.

Configuring Total P-GW Session Thresholds

Use the following example to configure the total P-GW session thresholds:
configure
threshold total-pgw-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll total-pgw-sessions interval <time>
threshold monitoring pgw-service
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
156
Total Session Thresholds
OL-25552-02