Cisco ASR 5000 Series Thresholding Configuration Manual page 16

▀ Additional Information
Important:
licenses, etc.). In these cases, the low threshold is the condition that must be met or exceeded within the polling interval
to generate the alert or alarm. Once the high threshold is exceeded during an interval, the low quantity condition is
cleared.
Thresholding functionality on the system can be configured to monitor the following values:
AAA:
ASN GW Service:
FA Service registration reply errors
HA Service:
HNB-GW Service Sessions:
PDSN Service:
Call setup:
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
16
Note that for certain values, the alert or alarm serves to warn of low quantities (i.e. memory, session
Archive size
Number of authentication failures
Authentication failure rate
Number of accounting failures
Accounting failure rate
Retry rate
AAA Manager request queue usage
Number of ASN GW Authentication failures
Number of ASN GW hand-off denials
Maximum number of EAP retries
Number of network entry denials
Number of Network Access Identifier (NAI) in R6 message
ASN GW timeout duration during session setup
ASN GW session timeout duration
Call setup rate
Registration Reply, Re-registration Reply, and De-registration Reply errors
Total HNB Sessions
Total UE Sessions
Total Iu Sessions
Call setup rate
A11 Messages failed and discarded
PPP send packets discarded
Number of calls setup
Number of call setup failures
RP setup failure rate
Thresholding Overview
OL-25552-02