▀ Configuring TPO Thresholds
Configuring TPO Thresholds
This section describes how to enable and configure TPO thresholds.
Enabling TPO Thresholds
To enable TPO thresholds use the following configuration:
configure
threshold monitoring tpo
end
Configuring Threshold Poll Interval
To configure threshold poll interval use the following configuration:
configure
threshold poll tpo-dns-failure interval <interval>
threshold poll tpo-low-compression-gain interval <interval>
threshold poll tpo-rto-timeout interval <interval>
end
Configuring Thresholds Limits
To configure threshold limits use the following configuration:
configure
threshold tpo-dns-failure <high_thresh> clear <low_thresh>
threshold tpo-low-compression-gain <high_thresh> clear <low_thresh>
threshold tpo-rto-timeout <high_thresh> clear <low_thresh>
end
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
162
Traffic Performance Optimizer Thresholds
OL-25552-02